Ormazd. Patio Doors. September 26th , 2017.
There are also many styles of the patio door. Some patio doors are made using the French door design, where the single panel of glass is cut into several pieces. The door frame of the French door has mullions, the bars where the glass panels are attached. Using a French deck door still creates the same transparent effect, although with a little more elegance.Some deck doors make use of sidelights to create a more spacious look. Sidelights are door-length windows installed at either side of the door. They may only be windows but they also use glass panels, making them transparent and letting more light and view into the house. Sidelights may either be narrower than or as wide as the doors themselves.
You may not have notice, but your old fashioned patio door is causing you to spend unnecessary energy. Ordinary glass is a notoriously good thermal conductor. During summer months, it can let heat from the outside to travel inside. And when it is winter, it can easily radiate coldness inside and may cause drafts. More heat or cold inside the home during summer or winter translates into more use of air-conditioning or heating systems. That means more energy use and more carbon emission and more expensive electric bills. But these doors are such an elegant household feature that many home owners before are not worried about spending more money for electricity and more energy that would cause more carbon emissions. Some have advocated the use of tinted patio glass doors. While tinted glass may be a good thermal insulator, it would deprive a home owner the most valued asset of this type of door: visual transparency. A patio door that would not allow a home owner to relax inside his home to get an uninterrupted view of his garden or yard would be just the same as a standard entry door.
Sight lines is the term used to describe the interruptions in the view through the doors; in other words, the width of the vertical opaque areas between the glass when the doors are closed. On hinged doors, such as French doors and bi folding doors, timber and pvc frames generally have broad sight lines because, unlike aluminium, narrower frames would not be strong enough to be fit for purpose. As a guide to the width of two frames together, cheaper pvc door frames can exceed 200mm, aluminium frames are typically between 135mm and 160mm and frameless patio doors sight lines are under 40mm. Depending on the width of each door and number of doors to be installed, the difference in glass to frame ratio could be significant.
Remove the two screws holding the bottom section of the frame. There is one screw either side of the bottom section. Once these have been removed the bottom section can be prized away from the rest of the frame. Be careful not to lever against the glass or you could shatter it. When the bottom section is clear from the rest of the frame you will be able to remove the wheels. Some wheels have a screw holding them in and some are pressed into a holding bracket. If the retaining screws have rusted you can carefully drill them out, taking care not to make the hole in the bottom section any bigger. Contact your local Hardware Store, Glazing Shop or search on Google for replacement wheels.
One of the features that adds real value to a home is the patio area. A patio allows you the option of comfortably relaxing outside while enjoying the weather. Its also a great place to entertain guests for picnics, parties and holidays. When it comes to deciding what to do with the doors leading out to the patio, you also have many options. One of the traditional choices are hardwood patio doors.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Redlotusmama claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.